Think about what passes through your office copier in a normal week: staff contracts, customer forms, payslips, bank letters, scanned IDs. Much of it is personal data, and it all goes through a shared device in the corridor that nobody thinks of as an IT system.

It is one. A modern multifunction printer (MFP) is a networked computer with storage, a user interface and, usually, an address book. This guide is for office managers, operations leads and IT generalists who want a plain checklist of what to ask about copier security, whether you rent or buy, and from whom.

Everything below is framed as questions to ask your provider. Features and settings differ by brand, model and firmware, so the honest answer is almost always “it depends on the machine and how it is set up”.

Why the copier belongs in your data protection thinking

Under Singapore’s Personal Data Protection Act (PDPA), the PDPC’s published guidance says an organisation must make reasonable security arrangements to protect personal data in its possession or under its control, to prevent unauthorised access, disclosure, copying, disposal and similar risks. PDPC’s guidance also says there is no one-size-fits-all approach. What counts as reasonable depends on factors such as the nature of the data, the form it is held in (physical or electronic) and the possible impact on the individual if it ended up in the wrong hands.

A copier touches both forms. Pages sit in the output tray (physical). Scans, queued jobs and stored settings sit on the device (electronic). Accountability stays with your organisation even when the machine is rented and serviced by someone else. That makes the questions below worth asking.

This is general information, not legal advice. For how the PDPA applies to your business, speak to your data protection officer or a qualified adviser.

1. Locked print: stop pages waiting in the tray

The classic copier leak is not a hacker. It is a payroll report sitting in the output tray for twenty minutes while people walk past.

Secure print, also called locked print, pull printing or “follow-me” printing, holds a job until the person who sent it is standing at the device and releases it with a PIN, card or login. Questions to ask:

  • Is secure or locked print available on the models we are considering, and is it built in or an extra software licence?
  • How is a job released: PIN, ID card, badge, or mobile app?
  • What happens to jobs nobody releases? Can they be deleted automatically after a set time?
  • Are held jobs encrypted while they wait, on the device or on a print server?

2. Authentication at the device

Locked print only works if the device knows who you are. Authentication at the panel also controls who can copy, scan and send.

  • Can users log in with a PIN, card or directory account, and can this be required for copy and scan as well as print?
  • Who holds the administrator password? Has the factory default been changed, and by whom?
  • Can access be removed quickly when someone leaves the company?
  • Is there a usage log of who printed, copied or scanned, and who can see it?

For small teams a PIN is a sensible start. The point is that “anyone can walk up and use it” should be a decision, not a default you forgot about.

3. What a copier can store: ask before you assume

Many MFPs keep information on internal storage. Ricoh’s published security documentation, for example, describes data that can sit on a multifunction device’s hard drive or non-volatile memory, including address books, user authentication data, stored documents, temporarily stored documents and logs. It also describes functions such as encrypting that data and overwriting temporary job data, and it notes that supported security functions vary by product. Whatever brand you use, here is what to ask:

  • Does this model have a hard drive or other storage? What does it hold: scanned images, print jobs, fax data, job history, address book entries?
  • Is stored data encrypted? Is temporary job data overwritten automatically, and is that setting turned on?
  • Are stored documents (for example, scan-to-box or document server folders) in use, and who can open them?
  • Does the address book contain real staff or customer details, and who can export it?
  • Who applies firmware updates and security patches, and how often?

“Very little is stored” is a fine answer, provided it is confirmed for the exact model in your office.

4. End of lease, end of life: the wipe

The riskiest moment in a copier’s life is often the day it leaves the building. Leases end, machines are upgraded, units are swapped after a repair. If storage inside has not been cleared, your data goes with the device.

Ask before you sign, not on collection day:

  • What is the procedure for clearing stored data when a machine is returned, replaced or taken out for repair?
  • Is it a documented, repeatable step, such as an overwrite of the hard drive, or just a factory reset?
  • Will we get written confirmation that data was cleared, and can we witness or request it?
  • Does our contract say who is responsible for data on the device after it leaves our site?
  • For purchased machines, what is the plan for disposal or trade-in?

Keep any confirmation with your records.

Renting or buying a Ricoh copier? 🖨️

Speak with McLink Asia about secure printing, device access, and end-of-lease data protection before making your decision.

Call +65 6846 8589 or email sales@mclinkgroup.com, or visit mclink.com.sg. The office is at 51 Ubi Ave 1 #05-11, Paya Ubi Industrial Park, Singapore 408933, open Monday to Friday 8:30am to 5:30pm and Saturday 8:30am to 12:30pm.